設備名稱：蘇州全自動超聲波清洗機生產廠家

蘇州全自動超聲波清洗機生產廠家-深圳心齊供應

深圳心齊全自動超聲波清洗機廠家的操作流程

1、準備好超聲波清潔機，倒入清水。打開電源開關。按照箭頭指示擰啟動開關，待指示燈亮起表示超聲波清潔機已啟動，即可進行清潔。

2、揭開蓋子，向大家展示內部的構造。實際上，里面只是一個凹槽，您可以將需要清洗的物品放入其中。在放入凹槽時，請務必確保工業全自動超聲波清洗機容器內裝滿水，務必裝滿水，否則可能無法洗凈。

3、操作步驟如下：啟動溢流管排放閥，將清洗液或水注入清洗池，直至清洗液開始溢出(建議使用刮刀之類的工具沿溢出口方向刮除漂浮油以促進其快速流出)，保持溢流管排放閥保持關閉，以防止意外溢出導致地面污染。

4、全自動超聲波清洗機設備的電源和加熱器電源必須配置良好的接地設備。嚴格禁止在超聲波清洗機沒有清洗液的情況下啟動，即在清洗槽中未加入足夠的清洗液前不得開啟超聲波開關。帶有加熱裝置的清洗設備在沒有液體時不得打開加熱開關。

5、定期啟動全自動超聲波清洗機器的油泵，每次至少運轉10分鐘以上。使用完清洗機后，請將其蓋上罩子，做好防塵和防潮工作。

6、心齊機械臂式全自動超聲波清洗機工作的第一步是開啟電源并安裝好進水管、出水管以及電路所需連接的部件。

Shenzhen heart complete automatic ultrasonic cleaning machine manufacturer's operating procedures

1、Prepare the ultrasonic cleaning machine, pour in water. Turn on the power switch. Screw the start switch according to the arrow instructions, and wait for the indicator light to come on to indicate that the ultrasonic cleaning machine has been activated, you can clean.

2. Uncover the lid to show you the inner structure. In fact, the inside is just a recess into which you can put the items that need to be cleaned. When you put in the recess, please make sure that the container of the industrial automatic ultrasonic cleaner is full of water. Make sure it is full of water, otherwise you may not be able to wash it.

3, the operating steps are as follows: start the overflow pipe discharge valve, the cleaning fluid or water into the cleaning pool, until the cleaning fluid began to overflow (it is recommended to use a scraper or other tools along the direction of the overflow port to scrape the floating oil to promote its rapid outflow), to keep the overflow pipe discharge valve to keep it closed, in order to prevent accidental overflow resulting in ground contamination.

4, automatic ultrasonic cleaning machine equipment power supply and heater power supply must be configured with good grounding equipment. Strictly prohibit the ultrasonic cleaning machine without cleaning fluid to start, that is, in the cleaning tank is not added to the sufficient cleaning fluid shall not be turned on before the ultrasonic switch. Cleaning equipment with a heating device in the absence of liquid may not open the heating switch.

5, regularly start the automatic ultrasonic cleaning machine oil pump, each time at least 10 minutes of operation. After using the cleaning machine, please cover it with a cover to prevent dust and moisture.

6, heart Qi mechanical arm type automatic ultrasonic cleaning machine work the first step is to turn on the power supply and install the inlet pipe, outlet pipe and the circuit required to connect the parts.